Cleaning e-cigarette vaporizers: tips and tricks for optimal performance
Regular cleaning of the e-cigarette vaporizer is essential to ensure optimal vapor development and taste quality. A clean atomizer not only ensures a pleasant vaping experience, but also extends the life of your e-cigarette. In this article you will learn why cleaning is so important, when and how best to clean your vaporizer.
Why does the evaporator need to be cleaned?
The e-cigarette vaporizer is a consumable part that wears out over time. During use, particles of e-liquid accumulate on the heating coil or wick, affecting the performance of the vaporizer. Deposits of liquid residues on the heating wire lead to a reduction in the heating output and affect the taste of the steam.
The Importance of Liquid Changes
When changing the e-liquid, it is recommended to also change the atomizer. A wick-like fiber material in the evaporator absorbs flavors, which can lead to a mixture of different flavors. Many vapers prefer separate vaporizers for different flavors to ensure purity of flavor.
When is the coil used up?
The coil, also called a heating coil, is a consumable and should be changed regularly to achieve optimal vapor and flavor results. The wire coil inside the evaporator constantly expands and contracts during heating and cooling processes, causing wear and tear. A burnt out coil shows itself through lower performance, a change in taste or when it no longer glows at all.
When should the evaporator be cleaned?
Cleaning the evaporator is advisable when the vapor development and flavor intensity decrease. This can vary depending on the vaporizer model and intensity of use. Some models require cleaning after just two weeks, while others require cleaning after a month or two.
Different methods for cleaning
There are several methods for cleaning the evaporator, depending on the model and degree of wear:
1. Blow out the evaporator
The easiest method is to blow out the evaporator. Remove the evaporator from the battery, remove dirt with a tissue and remove condensation. Blow vigorously through the atomizer to remove excess liquid and then clean it.
2. Bathe the vaporizer in alcohol
You can soak the vaporizer in pure alcohol or vodka overnight to loosen deposits. Clean the contacts and the evaporator head thoroughly beforehand. After bathing, let the evaporator dry and reassemble it.
3. Dryburn method
During dry burning, deposits on the heating coil are removed by briefly lighting up the heating coil. This should only be used if the vaporizer is about to be disposed of, as it can be damaged in the process.
4. Ultrasonic cleaning
The evaporator can be cleaned in an ultrasonic cleaner. Disassemble the evaporator beforehand and clean it with an ultrasonic bath that generates sound waves.
5. Boil with hot water
The evaporator can be soaked in boiling water to loosen any buildup.
Conclusion
Regular cleaning of your e-cigarette vaporizer is essential to ensure optimal performance and flavor quality. Various methods are available to remove deposits and extend the life of your vaporizer.
Frequently asked Questions:
-
Can I continue to use the vaporizer when changing e-liquid? Yes, you can use the same vaporizer, but separate vaporizers for different flavors are recommended.
-
How often should the coil be changed? The frequency depends on consumption, but in general the coil should be changed regularly.
-
When is the best time for dryburn? Dryburn should only be used on a vaporizer shortly before disposal.
-
Can I use the vaporizer directly after ultrasonic cleaning? After ultrasonic cleaning, allow the evaporator to dry thoroughly before reassembling.
-
Is there a method that is guaranteed not to damage the vaporizer? Most methods are safe when used correctly. However, please note the instructions for drying and application.
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.